Generator Bracket Replacement

REMOVAL PROCEDURE
1. Disconnect the battery negative cable from the battery.
2. Remove the generator.






3. Remove the generator bracket bolts.
4. Remove the generator bracket.
5. Remove engine lift hook.

INSTALLATION PROCEDURE
1. Install engine lift hook.






2. Install the generator bracket to the engine.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install and finger tighten the generator bracket bolts.
4. Tighten the generator bracket bolts to 50 N.m (37 lb ft).
5. Install the generator.
6. Connect the battery negative cable to the battery.