Rear Door Power Window Switch Replacement

REMOVAL PROCEDURE
1. Remove the rear door pull cup from the rear door trim panel.
2. Disconnect the electrical connectors from the power window control switch.
3. Remove the rear door window control switch from the front door pull cup using a small flat-bladed tool at the side of the power window control switch in order to release the power window control switch retainer.
4. Remove the power window control switch from the rear door pull cup.

INSTALLATION PROCEDURE
1. Install the rear door power window control switch to the rear door pull cup pressing into place until fully seated.
2. Connect the electrical connectors to the rear door power window control switch.
3. Install the rear door pull cup to the rear door trim panel.