Shift Cable (At Column Shift Control): Installation
- If installing NEW cable, see SHIFT CABLE (NEW CABLE INSTALLATION ONLY) . If reinstalling used cable, go to next step.
- Install the shift cable through the hole in the dash. See Figure . Properly route and position the shift cable. See Fig 1 . Install the shift cable to the manual control lever. See SHIFT CABLE (AT MANUAL CONTROL LEVER) .
- Install the shift cable to the shift control lever. See Figure . Install the steering column filler. See STEERING COLUMN FILLER .
- Install the shift cable retainer to the stud in the engine compartment. Adjust the shift cable (transaxle side). See SHIFT CABLE under ADJUSTMENTS.