LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Suburban C2500 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Diagnostic Tests >> Diagnostic System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic System Check

  1. Install scan tool. If scan tool powers up, go to next step. If scan tool does not power up, see SCAN TOOL DOES NOT POWER UP in appropriate BODY CONTROL MODULES article.
  2. Turn ignition on, engine off. Try to establish scan tool communication with Body Control Module (BCM). If communication with BCM is established, go to next step. If communication with BCM is not established, see SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE in appropriate BODY CONTROL MODULES article.
  3. Select display DTC function for BCM. Record all displayed DTCs and status of displayed DTCs. If DTCs are displayed, go to next step. If no DTCs are displayed, see SYMPTOM TESTS  .
  4. If scan tool does not display DTCs beginning with "U", go to next step. If scan tool displays DTCs beginning with "U", see SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE in appropriate BODY CONTROL MODULES article.
  5. If scan tool displays DTC B3102, see DTC B3102: KEYLESS ENTRY DATA LINK CIRCUIT LOW  . If scan tool displays any other DTC, see appropriate BODY CONTROL MODULES article.
scientia non olet · About LEMON Manuals