LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height >> Checking Procedure >> "U" Series (Front)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

"U" Series (Front)

  1. Lift front bumper about 1.5" (38 mm). Gently remove hands and allow vehicle to settle on its own. Do this 2 more times. Measure and record dimensions "Z" and "J". See Figure .
  2. Push front bumper down about 1.5" (38 mm). Gently remove hands and allow vehicle to rise on its own. Do this 2 more times. Measure and record dimensions "Z" and "J" again. To obtain ride height, average the high and low measurements.
  3. If ride height is not as specified, repair or replace suspension components as necessary. See RIDE HEIGHT SPECIFICATIONS  table. If ride height is okay, align wheels. See WHEEL ALIGNMENT PROCEDURES  .
scientia non olet · About LEMON Manuals