LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Lock System & Door Handles >> Programming >> Changing Automatic Door Lock Operation Mode >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Changing Automatic Door Lock Operation Mode: Notes

  1. Turn off instrument panel dimmer switch. Turn ignition switch to LOCK position.
  2. Remove BCM PRGRM fuse located in instrument panel fuse block. Turn ignition switch to ACC position. BCM will sound chime (2, 3 or 4 chimes) corresponding to BCM type installed on vehicle. BCM has now entered the feature customization mode.
  3. To change automatic door lock operation mode, press and release LOCK on either door lock switch. BCM will sound chime a number of times equivalent to automatic door lock operation modes. When Mode 4 is reached, Mode 1 will be repeated. To exit and save current customization mode, turn ignition off. Replace BCM PRGRM fuse. Automatic door lock control modes are as follows:
scientia non olet · About LEMON Manuals