LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Starting System) >> Diagnostic Information >> DTC P0563 >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0563: Testing

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Did you perform the DIAGNOSTIC SYSTEM CHECK - ENGINE ELECTRICAL? If so, go to next step. If not, go to DIAGNOSTIC SYSTEM CHECK - ENGINE ELECTRICAL .
  2. Turn OFF all the accessories. Measure the battery voltage at the battery using the DMM. Operate the engine speed above 2000 RPM. Is the battery voltage less than the specified value of 19V? If so, go to step  4. If not, go to next step.
  3. Replace the generator. See GENERATOR & REGULATORS . After replacement is complete, go to step  5.
  4. Replace the PCM. See POWERTRAIN CONTROL MODULE in REMOVAL, OVERHAUL & INSTALLATION . After replacement is complete, go to next step.
  5. Select the DIAGNOSTIC TROUBLE CODE (DTC) option and the CLEAR DTC INFORMATION option using the scan tool. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text, if applicable. See CONDITIONS FOR RUNNING THE DTC . Does the DTC reset? If so, go to step  2. If not, then system is okay.
scientia non olet · About LEMON Manuals