Assembly Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery into the transmitter.
- Reassemble the transmitter.
- Inspect the transmitter halves. Ensures that the transmitter halves are snapped together in order to prevent water intrusion.
- Synchronize the transmitter as needed. Refer to Transmitter Synchronization .
- Verify the transmitter operation. Refer to Keyless Entry System Description and Operation .