LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement (RWD) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the splash shield gasket.
  2. Install the wheel speed sensor splash shield (6).
  3. Install the 2 11 mm splash shield mounting bolts. Tighten the splash shield mounting bolts to 16 N.m (12 lb ft).
  4. Install the wheel speed sensor mounting bolts and nut. Tighten the speed sensor mounting bolts to 26 N.m (19 lb ft).
  5. Install the harness clips to the wheel speed sensor wire. Locate the clips at the paint dots on the wire.
  6. Install the harness clips with 3/16 inch rivets.
  7. Connect the wheel speed sensor electrical connector (2).
  8. Install the hub and rotor (3). Refer to FRONT BRAKE ROTOR .
  9. Install the brake caliper (1). Refer to FRONT BRAKE CALIPER .
  10. Install the tire and wheel.
scientia non olet · About LEMON Manuals