Conditions For Running DTC

DTCs P0101, P0102, P0103, P0107, P0108, P0401, P0404, P0405, P0410, P0440, P0442, P0443, P0446, P1120, P1125, P1220, P1221, P1275, P1276, P1280, P1281, P1285, P1286, P1514, P1515, P1516, P1517, or P1518 are not set.
The engine is running.
The engine speed is between 400-5000 RPM.
The change in engine speed is less than 125 RPM.
The traction control is not active.
A change in idle air is less than 10 g/s.
A change in the Exhaust Gas Recirculation (EGR) position is less than 20 percent.
The A/C compressor clutch is steady.
The power steering is stable.
The Power Take-Off (PTO) is not active.
The clutch switch state does not change.
The brake switch state does not change.
All conditions are stable for 1 second.