LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> C3500 HD 6.5 F, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Place the power steering pump pulley on the end of the power steering pump shaft.
  2. Install the power steering pump pulley using J 25033-C  .
    Fig 1: Installing Power Steering Pump Pulley Using J 25033-C
    G01585458Courtesy of GENERAL MOTORS CORP.
  3. Ensure that the power steering pump pulley is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
  4. Install the drive belt. Refer to DRIVE BELT REPLACEMENT in Engine Mechanical 6.5L or DRIVE BELT REPLACEMENT in Engine Mechanical 8.1L.
  5. Install the upper fan shroud. Refer to FAN SHROUD REPLACEMENT (UPPER) or FAN SHROUD REPLACEMENT (LOWER) in Engine Cooling.
    Fig 2: Power Steering Pump Pulley Installation Position
    G01585459Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals