LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Impala Base, 3.8 K >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Repair Instructions >> Coolant Level Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Lubricate the O-ring seal with coolant.
  2. Position the snap clip leg in place.
  3. Install the low coolant module.
  4. Connect the low coolant module electrical connector.
  5. Install the battery.
  6. Install the right diagonal brace.
  7. Fill the cooling system. Refer to Draining & Filling Cooling System .
scientia non olet · About LEMON Manuals