LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Prizm LSi, Automatic, A245E/MS7 >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Lamp Driver Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the LDM (2) to the printed circuit.
  2. Install the Instrument Cluster Assembly (1). Refer to INSTRUMENT PANEL CLUSTER .
  3. Perform Diagnostic System Check - ABS (Figure).
    Fig 1: Installing Lamp Driver Module
    G01711242Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals