LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1095 (Frame And Underbody) >> Diagnostic Information and Procedures >> Checking Frame Alignment >> Frame-To-Body Alignment
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Frame-To-Body Alignment

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Check the frame-to-body alignment by inserting a 19 mm (3/4 in) diameter guide pin or drill bit into the frame-to-body guide pin holes. If the guide pins will not fit the frame the frame is not in correct alignment with the body. To realign the frame refer to Frame Replacement - Front (W/AWD)  or Frame Replacement - Front (W/FWD)  and Crossmember Replacement .

scientia non olet · About LEMON Manuals