Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Grand Am and 2003 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
- Use a 3-volt CR2016 battery or the equivalent. Install the battery (2) with the positive side up.
- Close the transmitter case (6,4).
- Ensure that the seal is in position. Align the 2 halves of the case (6,4) and snap the halves together.
- Verify the operation of the transmitter.
- Synchronize the transmitter if necessary. Refer to TRANSMITTER SYNCHRONIZATION .