Compressor Mounting Bracket Replacement - Lower

REMOVAL PROCEDURE




1. Remove the compressor.
2. Remove the power steering pump, if equipped.
3. Remove the 3 bolts from the compressor lower mounting bracket and remove the bracket (2) from the vehicle.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the compressor lower mounting bracket (2) to the vehicle and secure with the 3 bolts.

Tighten
Tighten the compressor lower mounting bracket bolts to 18-25 N.m (13-20 lb ft).

2. Install the power steering pump, if equipped.
3. Install the compressor.