LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the adjuster switch electrical connector.
  2. Install the adjuster switch to the finish cover.
  3. Install the finish cover to the seat adjuster.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the finish cover screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  5. Connect the front seat pretensioner electrical connector.
  6. Connect the front seat SIR module electrical connector.
    Fig 1: Installing Finish Covers To Front Seat Frame
    G01814298Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals