Section 1380 (Exterior Trim): Specifications
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Quarter Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Grille Center Bolts | 4 N.m | 35 lb in |
| Lower Front Quarter Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Lower Quarter Wheel Opening Molding Retainer Nut | 2 N.m | 18 lb in |
| Lower Rear Fender Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Rear Rocker Molding Retainer Nut | 2 N.m | 18 lb in |
| Rear Quarter Molding Screw | 2 N.m | 18 lb in |