Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Install the power window switch to the switch mounting plate.
Connect the electrical connectors.

Fig 1: Installing Switch Mounting Plate To Front Door Trim Panel
Courtesy of GENERAL MOTORS CORP.
Install the switch mounting plate to the front door trim panel.
Insert the front edge into the trim panel and snap down the rear of the switch mounting plate to the front door trim panel.

Fig 2: Installing Switch Mounting Plate To Front Door Trim Panel
Courtesy of GENERAL MOTORS CORP.