Blower Motor Control Processor
WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
The blower motor control processor is an interface between the HVAC Control Module (IPM) and the blower motor. The blower motor speed control, battery positive voltage and ground circuits enable the control processor to operate. The IPM provides a PWM signal to the control processor in order to command the blower motor speed. The processor supplies 12 volts to the blower motor through the blower motor voltage supply circuit. The control processor uses the blower motor ground as a low side control to adjust the blower motor speed.