Transmission Support Replacement

Transmission Support Replacement

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Support the transmission with a transmission jack.
3. Remove the two nuts securing the transmission mount to the transmission support.




4. Remove the transmission support nuts and bolts.
5. Remove the transmission support from the vehicle.



Installation Procedure





1. Install the transmission support to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the transmission support nuts and bolts.

Tighten the nuts and bolts to 70 N.m (52 lb ft).





3. Install the two nuts securing the transmission mount to the transmission support.

Tighten the nuts to 45 N.m (33 lb ft).

4. Remove the transmission jack.
5. Lower the vehicle.