Sunroof / Moonroof Module: Service and Repair
SUNROOF CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Close the sunroof.
2. Remove the headliner.
3. Remove the tie wraps securing the power sunroof control module wire harness to the drive and return tubes.
4. Release the retainers for the power sunroof control module by sliding the control module (2) towards the middle of the vehicle.
5. Disconnect the wire harness electrical connectors from the power sunroof control module (2).
INSTALLATION PROCEDURE
1. Connect the wire harness connectors to the power sunroof control module (2).
2. Engage the power sunroof control module retainers by sliding the control module (2) towards the left side of the vehicle.
3. Install the tie wraps to secure the power sunroof control module wire harness to the drive and return tubes.
4. Install the headliner.