Power Window Switch: Service and Repair

POWER WINDOW SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Use a flat-bladed tool in order to remove the power window switch bezel (1) from the console.
2. Remove the electrical connection from the power window switch (2).
3. With a flat-bladed tool release the power window switch (2) tabs, and remove the switch from the power window bezel (1) retainers.

INSTALLATION PROCEDURE




1. Install the power window switch (2) into the power window switch bezel (1) until fully seated.
2. Connect the electrical connector to the power window switch (2).
3. Install the power window switch bezel (1) to the floor console.