LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Chevy Express H2500 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Repair Instructions >> Radio Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the radio mounting bracket. Perform the following steps:
    1. Attach the HVAC harness to the radio mounting bracket with the clip.
      CAUTION: Refer to FASTENER NOTICE .
    2. Install the screws (2) in order to retain the radio mounting bracket (1) to the instrument panel carrier.

      Tighten 

      Tighten the screws to 3 N.m (27 lb in).

    Fig 1: Installing Radio Mounting Bracket
    G02422466Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical/audio and antenna cable connectors to the radio.
  3. Install the radio to the support bracket (1).
  4. Align the radio locator tab into the support bracket locator hole.
  5. Install the radio screws (2).

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  6. Install the instrument cluster panel. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
  7. Calibrate the new radio assembly. Refer to Service Programming System (SPS) Description .
    Fig 2: Installing Radio
    G02422467Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals