LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Traction Control Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Turn off the ignition switch.
  2. Open the center console door.
  3. Pull up on the rear of the switch assembly in order to release the mounting clips; if the switch does not release from the trim plate, perform the following steps:
    1. Carefully insert a screwdriver into the access hole located on the rear of the switch assembly.
    2. Gently pull up on the switch.
  4. Disconnect the harness connector (1).
  5. Remove the switch assembly (2).
Fig 1: Removing Traction Control Switch
G01420481Courtesy of GENERAL MOTORS CORP.