Camshaft Position Sensor: Service and Repair

REMOVAL PROCEDURE
1. Raise the vehicle.

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

2. Remove the right tire assembly.




3. Disconnect the camshaft position (CMP) sensor electrical connector.




4. Remove the CMP sensor.

INSTALLATION PROCEDURE




1. Install the camshaft position (CMP) sensor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the CMP sensor bolt to 10 N.m (89 lb in).




2. Connect the CMP sensor electrical connector.
3. Install the right tire assembly.
4. Lower the vehicle.