LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Repair Instructions >> Amplifier Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Amplifier Electrical Connectors & Fasteners
    GM1344086Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Connect the electrical connectors (3) to the amplifier.
  2. Install the 4 fasteners (1, 2) that hold the amplifier to the bin.

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

    3. Fig 2: View of Intermediate Bracket Fasteners
    GM1344058Courtesy of GENERAL MOTORS CORP.
  3. Install the 4 fasteners retaining the intermediate bracket.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  4. Install the folding top control module. Refer to Folding Top Control Module Replacement in Roof.
  5. Install the rear relay center. Refer to Rear Electrical Center or Junction Block Replacement in Wiring Systems.
  6. Install the DRL diode. Refer to Daytime Running Lamps (DRL) Diode Replacement in Lighting Systems.
    7. Fig 3: Identifying Body Accessory Compartment Lid Nuts
    GM1386454Courtesy of GENERAL MOTORS CORP.
  7. Install the lid to the body accessory compartment.

    Tighten:  Tighten the nuts to 7 N.m (62 lb in).

  8. Close the folding top.
scientia non olet · About LEMON Manuals