LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Seat Position Switch, Electrical Connector & Retaining Nuts
    GM1200367Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the seat position switch (3) to the seat rail with 2 nuts (2).

    Tighten:  Tighten the seat position switch nuts to 4 N.m (35 lb in).

  2. Connect the electrical connector (1) to the seat position switch (3).
  3. Install the seat in the vehicle. Refer to Seat Replacement in Seats.
scientia non olet · About LEMON Manuals