Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the shock module from the vehicle. Refer to Shock Module Replacement .
- Remove the shock module yoke to shock absorber pinch bolt and nut.
- Spread the shock module yoke at the pinch bolt using a flat-bladed tool.
- Remove the shock module yoke from the shock absorber.
- Install pieces of heater hose to the shock module spring where J 45400 contacts lower part of spring. See Special Tools .
- Install the shock module (2) into the J 45400 (1). See Special Tools .
- Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
- Remove the shock absorber upper retaining nut.
- Remove the shock absorber from the shock module.
- Loosen the compressor forcing screw until the upper mounting plate and coil spring may be removed.
- Remove the upper mounting plate and coil spring from the J 45400 . See Special Tools .
IMPORTANT:
The spring is compressed when the shock absorber moves freely.