LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Stabilizer Shaft, Insulator, Insulator Clamp & Mounting Bolts
    GM1257519Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft to the vehicle.
  2. Install the stabilizer shaft insulators to the stabilizer shaft.
  3. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.
    4. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the stabilizer shaft insulator clamp mounting bolts.

    Tighten:  Tighten the stabilizer shaft insulator clamp mounting bolts to 55 N.m (41 lb ft).

  5. Install the stabilizer shaft links to the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals