October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

KNOCK SENSOR (KS) REPLACEMENT

REMOVAL PROCEDURE

1. Remove the intake manifold.
2. Remove the KS wiring harness assembly.

3. Remove the KS.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the KS.

Tighten
Torque the sensor to 20 N.m (15 lb ft).

2. Install the KS wiring harness assembly.
3. Install the intake manifold.