Compressor Mounting Bracket Replacement - Lower

COMPRESSOR MOUNTING BRACKET REPLACEMENT - LOWER

REMOVAL PROCEDURE
1. Remove the compressor.
2. Remove the power steering pump, if equipped.




3. Remove the 3 bolts from the compressor lower mounting bracket and remove the bracket (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the compressor lower mounting bracket (2) to the vehicle and secure with the 3 bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the compressor lower mounting bracket bolts to 18-25 N.m (13-20 lb ft).

2. Install the power steering pump, if equipped.
3. Install the compressor.