LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Repair Instructions >> Radio Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Connect the electrical/audio and antenna cable connectors to the radio.
    Fig 1: Connecting Electrical/Audio And Antenna Cable Connectors To Radio
    G01534283Courtesy of GENERAL MOTORS CORP.
  2. Install the radio into the I/P center support bracket.

    Align the radio locator tab into the I/P center support bracket locator hole.

    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the bolts/screws to the radio.

    Tighten 

    Tighten the bolts/screws to 2.5 N-m (22 lb in).

  4. Install the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY in Instrument Panel, Gages and Console.
  5. Perform the radio set up procedure. Refer to RADIO SETUP   . 
    Fig 2: Installing Bolts/Screws To Radio
    G01534284Courtesy of GENERAL MOTORS CORP.