LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Motor Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Position the wiper drive system module to the air inlet panel.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the wiper drive system module screws.

    Tighten 

    Tighten the screws to 10 N.m (89 lb in).

  3. Install the wiper motor. Refer to WIPER MOTOR REPLACEMENT   .
  4. Install the cruise control and bracket. Refer to CRUISE CONTROL MODULE REPLACEMENT  in Cruise Control.
  5. Install the air inlet grille panel. Refer to AIR INLET GRILL PANEL REPLACEMENT  in Body Front End.
  6. Install the wiper arms. Refer to WIPER ARM REPLACEMENT   .
  7. Inspect the wipers for proper operation.
    Fig 1: Installing Wiper Drive System Module To Air Inlet Panel
    G01534203Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals