LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - 4.3L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the IAT sensor in the air cleaner outlet duct.
    Fig 1: Intake Air Temperature (IAT) Sensor
    GM317493Courtesy of GENERAL MOTORS CORP.
  2. Connect the IAT sensor harness connector.
    Fig 2: Locating Intake Air Temperature (IAT) Sensor Harness Connector
    GM423117Courtesy of GENERAL MOTORS CORP.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals