Power Accessory Switch Panel Replacement
POWER ACCESSORY SWITCH PANEL REPLACEMENTREMOVAL PROCEDURE
1. Using a small flat-bladed tool to release the power accessory switch panel retainers (1) from the door trim panel, push in and lift up. Start at the front of the panel.
2. Disconnect the electrical connectors (1, 2) from the switches.
3. Remove the power window switch from the accessory panel by releasing the retainer tabs.
4. Remove the power mirror switch from the accessory panel by releasing the retainer tabs.
INSTALLATION PROCEDURE
1. Install the power mirror switch to the accessory panel by pressing it into the retainer tabs until fully seated.
2. Install the power window switch to the accessory panel by pressing it into the retainer tabs until fully seated.
3. Connect the electrical connectors (1, 2) to the switches.
4. Install the power accessory panel to the door trim panel by pressing until the retainers (1) are fully seated.