Battery: Service and Repair

BATTERY REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Disconnect the positive battery cable.
3. Remove the battery hold down retainer.

IMPORTANT: Do not tip the battery more than 40 degrees during removal.




4. Remove the battery.

INSTALLATION PROCEDURE

IMPORTANT: Do not tip the battery more than 40 degrees during battery installation.




1. Install the battery to the battery tray.
2. Install the battery hold down retainer.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the positive battery cable.

Tighten the cable bolt to 15 N.m (11 lb ft).

4. Connect the negative battery cable bolt.