LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Power Seat Switch Components
    GM740550Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (5) to the switch (3).
  2. Position the switch (3) to the seat cushion frame (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the switch bracket screw (4).

    Tighten:  Tighten the screw to 5 N.m (44 lb in).

  4. Adjust the seat cushion cover (1) to a desired appearance.

    Fasten the cushion cover J-hook retainer.

    5. Fig 2: Identifying Power Seat Switch
    GM740566Courtesy of GENERAL MOTORS CORP.
  5. Align the bezel (1) to the switch (3).

    Press the bezel (1) into place until fully seated.

  6. Adjust the seat to the original position.
scientia non olet · About LEMON Manuals