Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Radio & Screws

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Perform the radio set up procedure for new and reinstalled radios. Refer to Radio Setup .

Remove the instrument panel (I/P) accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Pontiac) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Oldsmobile) in Instrument Panel, Gages and Console.
Remove the radio screws.
Pull the radio toward you for access to the connectors.
Disconnect the I/P wiring harness connectors and the antenna cable connector from the radio.
Remove the radio from the I/P.