LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System & Starting System >> Repair Instructions >> Generator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: Positive & Negative Battery Cable
    GM675304Courtesy of GENERAL MOTORS CORP.
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 5.7 L.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
    3. Fig 2: Generator Electrical Connector Engine Harness Terminal
    GM651874Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the generator electrical connector (1).
  4. Remove the engine harness terminal from the generator:
    1. Slide the boot back along the cable.
    2. Remove the engine harness cable nut (3).
    3. Remove the engine harness terminal from the stud.
    5. Fig 3: Generator Bolts & Generator
    GM74067Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator bolts and the generator.
scientia non olet · About LEMON Manuals