Removal Procedure
- Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure .
- Disconnect the negative battery cable.
- Disconnect the intake air temperature (IAT) sensor connector.
- Disconnect the breather hose from the valve cover.
- Remove the air intake tube.
- Disconnect the vacuum hose from the fuel pressure regulator.
- Remove the fuel pressure regulator retaining clamp.
- Remove the fuel pressure regulator by turning it back and forth and then pulling it out.
- Discard the O-ring.
NOTE:
Refer to Fuel Pressure Notice
in Cautions and Notices.
CAUTION:
Refer to Battery Disconnect Caution
in Cautions and Notices.