Power Mirror Switch Replacement

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Power Mirror Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
1	Front Side Door Switch Assembly Tip: The power window, door lock and power mirror switch are included in the one switch. Disconnect the electrical connectors. To disengage the switch assembly, push up on the switch assembly from the rear inside of the door trim panel.
2	Front Side Door Switch Screw (Qty: 3) Tighten: 2 N.m (18 lb in)
3	Front Side Door Switch Plate