Removal Procedure
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
Courtesy of GENERAL MOTORS CORP.
- Remove the pipe retaining clip from the fuel feed pipe (1).
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle
in General Information.
- Disconnect the fuel feed pipe from the engine fuel rail. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
- Cap or plug the fuel pipe and the engine fuel rail to prevent contamination.
- Remove the rear brake pipe bracket retaining nuts and release the brackets from the body studs.
Courtesy of GENERAL MOTORS CORP.
- Release the pipe retainers (1) from the vehicle underbody.
- Remove the fuel feed pipe from the pipe retainers.
- Lower the rear of the pipe while moving the pipe rearward slightly, then lower the front of the pipe.
- Remove the fuel feed pipe from the vehicle.