Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the headliner to the roof through the rear of the vehicle.
- Align the locking tab at the front overhead console.
- Push the headliner rearwards in order to lock the headliner into place.
- Install the rear headliner push-in retainers.
- Install the liftgate weatherstrip. Refer to Weatherstrip Replacement - Liftgate in Body Rear End.
- Install the rear corner upper garnish molding. Refer to Finish Panel Replacement - Upper Rear Trim .
- Install the body side rear upper garnish molding. Refer to Trim Panel Replacement - Body Lock Pillar Upper .
- Install the upper pillar garnish molding. Refer to Trim Panel Replacement - Upper Center Pillar .
- Install the headliner trim finishing molding. Refer to Headlining Trim Finish Molding Replacement .
- Install the rear cargo lamps. Refer to Cargo Lamp Replacement .
- Install the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
- Install the overhead console. Refer to Console Replacement - Overhead .
- Install the sunshades. Refer to Sunshade Replacement .
- Install the front door opening Weatherstrips. Refer to Weatherstrip Replacement - Front Door Opening in Doors.
- Install the windshield garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar .