LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Malibu Maxx LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    Fig 1: Removing MAP Sensor And MAP Sensor Seal From Upper Intake Manifold
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the MAP sensor electrical connector.
  2. Remove the MAP sensor attaching screw.
  3. Remove the MAP sensor and MAP sensor seal from the upper intake manifold.
scientia non olet · About LEMON Manuals