LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - 4.3L - Introduction) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the IAT sensor in the air cleaner outlet duct.
    Fig 1: Intake Air Temperature (IAT) Sensor
    GM317493Courtesy of GENERAL MOTORS CORP.
  2. Connect the IAT sensor harness connector.
    Fig 2: Locating Intake Air Temperature (IAT) Sensor Harness Connector
    GM423117Courtesy of GENERAL MOTORS CORP.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals