LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> S10 Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Battery, Charging System & Starting System) >> Repair Instructions >> Generator Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Safari and 2004 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the generator on the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Loosely install the mounting bolts.
    Fig 1: Identifying Generator Mounting Bolts
    GM332407Courtesy of GENERAL MOTORS CORP.
  3. Install the generator output (BAT) lead.
  4. Loosely install the generator output (BAT) nut.

    Tighten: 

    • Tighten the mounting bolts to 50 N.m (37 lb ft).
    • Tighten the generator output (BAT) terminal nut to 10 N.m (89 lb in).

  5. Connect the regulator electrical connector.
  6. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical-4.3L.
  7. Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls-4.3L.
  8. Connect the battery negative cable.
scientia non olet · About LEMON Manuals