Ground Strap: Service and Repair

GROUND STRAP REPLACEMENT

REMOVAL PROCEDURE
1. Open the hood.
2. Remove the nut retaining ground strap to frame.
3. Raise the vehicle. Refer to Vehicle Lifting.
4. Remove the bolt retaining ground strap to engine block and remove strap.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the strap and bolt to engine block.

Tighten
Tighten bolt to 50 N.m (37 lb ft).

2. Lower the vehicle.
3. Install the nut to retain strap to frame.

Tighten
Tighten nut to 25 N.m (18 lb ft).

4. Close the hood.