LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Lighting Systems (Introduction)) >> Repair Instructions >> Ambient Light Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel top cover. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector (1) to the ambient light sensor on the underside of the IP top cover.
  3. Turn the ambient light sensor 1/4 turn and remove it from the IP top cover.
    4. Fig 1: View Of Ambient Light Sensor Electrical Connector
    GM350507Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals