Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Install the bulb into the socket.
Install the bulb socket to the tail/turn lamp assembly by rotating the socket 1/4 turn clockwise.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).

Fig 1: View Of Tail/Turn Signal Lamp Assembly

Courtesy of GENERAL MOTORS CORP.

Close the endgate/liftgate.
Inspect the operation.